Actual H11-861_V3.0 Exam Recently Updated Questions with Free Demo
Free Huawei H11-861_V3.0 Exam Questions Self-Assess Preparation
Huawei H11-861_V3.0 (HCIP-Collaboration V3.0) exam is a professional-level certification designed for IT professionals who are interested in working with cutting-edge collaboration technologies. HCIP-Collaboration V3.0 certification validates the knowledge and skills required to plan, design, implement, operate, and troubleshoot complex collaboration solutions based on Huawei’s unified communication and collaboration (UCC) products.
NEW QUESTION # 270
The following description of NAT mapping is correct ( ).
- A. Static NAT is the simplest and easiest to implement, with each host address in the internal network permanently mapped to a legitimate address in the external network
- B. Dynamic Address NAT, the most common mapping method in video services
- C. Dynamic address NAT is a series of legitimate addresses defined in the external network that are mapped to the internal network using a dynamically assigned method
- D. NAPT is an IP address that maps an internal address to an IP address on an external network on different ports on the
Answer: A,C,D
NEW QUESTION # 271
The advantages of static NAT include. ( )
- A. Most endpoints support NAT functionality.
- B. The endpoint after port NAT is protected by a firewall.
- C. The terminals in the four private networks are no different from the public network terminals, and the public network terminals can directly call the public network address after the NAT of the private network terminals.
- D. Back is very practical when there are a small number of private network terminals that need to access the public network.
Answer: A,C,D
NEW QUESTION # 272
In the MCU Web page, the format of the exported address book information is ( ).
- A. cap
- B. dat
- C. xml
- D. vcf
Answer: D
NEW QUESTION # 273
The gateway in 502.H. 323 is between a circuit-switched network and a packet-switched network. ( )
- A. False
- B. True
Answer: B
NEW QUESTION # 274
When MiniMCU is cascaded, calls that exceed three cascades will fail. ()
- A. True
- B. False
Answer: B
NEW QUESTION # 275
The default operating mode of the GE1 port of the MCU is ().
- A. Ride the Wall
- B. backup
- C. Dynamically switch
- D. Grab Package
Answer: B
NEW QUESTION # 276
The color temperature range for warm colors is ( ).
- A. >5000K
- B. <3000K
- C. 5000K-8000K
- D. 3000K-5000K
Answer: B
NEW QUESTION # 277
The environment of the display area requires low illumination, and the reasons for the lower illumination required at the digital projection screen are ( ).
- A. is required The number of shots uses a white screen, and in order to get enough black pixels, a lower ambient illumination answer is required
- B. Counting casts use white screens, and in order to get enough dark black pixels, a lower ambient illumination
- C. If the ambient light is too dim and the pupil is constricted, the black and white pixel display will show a difference
- D. If the ambient light is too bright and the pupil is constricted, there will be a difference in the display of black and white pixels
Answer: B,D
NEW QUESTION # 278
The RTCP protocol can be freely controlled by SDES grouping, with RTCP SDES marking members away from the session, or members changing SSRC.
- A. True
- B. False
Answer: B
NEW QUESTION # 279
The H323 protocol ends up with the number 3 denoting ( ).
- A. Networks based on packet transfer protocols
- B. B-ISDN-based network
- C. Based on networks with quality of service assurance
- D. GSTN- and wireless network
Answer: A
NEW QUESTION # 280
What are the correct items in the following description of the SIP protocol?
- A. SIP is a transport layer protocol
- B. SIP is a protocol developed by IETF for multimedia sessions
- C. SIP is an application layer protocol
- D. The IP protocol uses a distributed architecture
Answer: B,C,D
NEW QUESTION # 281
In video conferencing, local noise is required not to be greater than ().
- A. 40dB
- B. 38dB
- C. 34dB
- D. 36dB
Answer: B
NEW QUESTION # 282
What are the following message interactions included in the process of a terminal calling by number using the H.323 protocol?
- A. Connect
- B. Setup
- C. ARQ
- D. ACF
Answer: C
NEW QUESTION # 283
SR messages in RTCP are send reports that describe sending and receiving statistics as sending gateways. ( )
- A. False
- B. True
Answer: B
NEW QUESTION # 284
SEC2.0 is suitable for network packet loss models that are burst-type packet losses.
- A. True
- B. False
Answer: B
NEW QUESTION # 285
In audio coding technology, which of the following is a voice quality metric. ( )
- A. Band width
- B. Packet loss rate
- C. Delay
- D. Anti-interference
Answer: A,B,C
NEW QUESTION # 286
Intelligent control system includes video system, audio system and others, which of the following does not belong to the video system. ( )
- A. Pickup system
- B. Video Input System
- C. The video shows the system
- D. Lighting system
Answer: D
NEW QUESTION # 287
The standby GK completes the following procedures ( ) in response to a synchronization request.
- A. Start the synchronization task process (lowest priority)
- B. A timed 1 second checks whether the synchronization is over
- C. Check whether the system data status is valid for the primary use
- D. Task pause 1ms
Answer: A,B,C
NEW QUESTION # 288
......
By obtaining the Huawei HCIP-Collaboration V3.0 certification, IT professionals can demonstrate their knowledge and expertise in collaboration technologies, which can lead to new career opportunities and higher salaries. HCIP-Collaboration V3.0 certification also helps organizations to identify and hire skilled IT professionals who can help them to design, deploy, and manage complex collaboration solutions.
H11-861_V3.0 Free Sample Questions to Practice One Year Update: https://lead2pass.guidetorrent.com/H11-861_V3.0-dumps-questions.html