Dec 15, 2024 PASS EMC D-PVM-DS-23 EXAM WITH UPDATED DUMPS
D-PVM-DS-23 Questions PDF [2024] Use Valid New dump to Clear Exam
NEW QUESTION # 19
A storage architect wants to estimate how much additional workload a VMAX All Flash running Enginuity 5876 can handle.
Which FAST component can be used to display application performance metrics on this storage system?
- A. Unisphere for PowerMax Workload Planner
- B. Storage Groups associated with a Service Level
- C. Unisphere server installed on an open systems host
- D. FAST does not have this option on a VMAX All Flash
Answer: A
NEW QUESTION # 20
A storage architect is demonstrating to a customer how they can register vCenter and ESXi servers, view all relevant storage related objects of an ESXi server, and troubleshoot storage performance.
Which system view in Unisphere can be used to do these things?
- A. vCenter
- B. vSphere
- C. Hosts
- D. VMware
Answer: D
NEW QUESTION # 21
What is used for BCSD data collection in VMware environments?
- A. RVTools
- B. VMware Tools
- C. ESXTOP
- D. PowerCLI
Answer: D
NEW QUESTION # 22
A VMware administrator has been tasked with managing storage for an ESXi cluster connected to a PowerMax array. The administrator is not familiar with Unisphere for PowerMax and wants to use the VMware Web Client to provision RDM volumes to virtual machines.
Which Dell EMC product provides this functionality?
- A. VASA
- B. VAAI
- C. VSI Plug-in
- D. Client Integration Plug-in
Answer: C
NEW QUESTION # 23
A storage architect is planning a Unisphere for PowerMax server deployment to support the maximum number of volumes and highest number of supported arrays.
How much memory is required?
- A. 24 GB
- B. 16 GB
- C. 32 GB
- D. 12 GB
Answer: C
NEW QUESTION # 24
What is a requirement for single-host SRDF/Metro configurations?
- A. Witness array
- B. Embedded management
- C. Unisphere running on the host
- D. Multi-pathing software
Answer: D
NEW QUESTION # 25
A storage architect is planning a Unisphere upgrade.
Which password is required for the upgrade?
- A. lockbox
- B. sysadmin
- C. boxmgmt
- D. root
Answer: D
NEW QUESTION # 26
In what format can loaded and mapped BCSD performance data be exported?
- A. CSV
- B. XML
- C. DOC
- D. PFD
Answer: A
NEW QUESTION # 27
A data migration is being planned from a Hitachi to a PowerMax using Open Replicator.
Which flag is used to protect against SAN failure?
- A. Hot Push
- B. Donor Update
- C. Copy on Access
- D. Background Copy
Answer: B
NEW QUESTION # 28
A PowerMax parent Storage Group (SG) contains two child SGs: SG1 and SG2.
What is a valid Host I/O bandwidth limit setting for this configuration?
- A. Parent SG: 400
SG1: 500
SG2: 200 - B. Parent SG: 500
SG1: 500
SG2: 400 - C. Parent SG: 400
SG1: 500
SG2: NOLIMIT - D. Parent SG: 500
SG1: NOLIMIT
SG2: 1000
Answer: B
NEW QUESTION # 29
What can administrators manage on a PowerMax using VSI?
- A. High Availability
- B. Data protection systems
- C. Replication sessions
- D. Distributed Resource Scheduler
Answer: C
NEW QUESTION # 30
Which migration options are supplied with PowerMaxOS and HYPERMAX OS at no cost?
- A. NDM, Open Replicator, and SRDF/DM
- B. SRDF/DM, RecoverPoint, and AppSync
- C. Open Replicator, RecoverPoint, and AppSync
- D. NDM, Open Replicator, and AppSync
Answer: A
NEW QUESTION # 31
What is the default data collection interval for TTP collections?
- A. 10 minutes
- B. 15 minutes
- C. 30 minutes
- D. 5 minutes
Answer: B
NEW QUESTION # 32
What is a consideration when deploying concurrent devices in an SRDF/Metro configuration?
- A. Non-Metro mirror of the Metro devices can be an R2
- B. R2 device in an SRDF/Metro configuration can be an R21
- C. R2 device in an SRDF/Metro configuration can be an R22
- D. Non-Metro device must be in Synchronous mode
Answer: C
NEW QUESTION # 33
Which deduplication methods are supported for VMAX all Flash?
- A. Adaptive Compression Engine, Compression I/O module, and LZS Compression algorithm
- B. Extended Data Compression, inline Deduplication, and LZS Compression algorithm
- C. Adaptive compression Engine, CKD Storage Resource Pool, and Compression I/O module
- D. DEFLATE compression algorithm, inline deduplication, and FBA storage Resource Pool
Answer: A
NEW QUESTION # 34
What is a characteristic of a PowerMax Open Replicator control device?
- A. Cannot be R1 in an SRDF configuration
- B. Can be involved in a TimeFinder session
- C. Cannot be involved in a TimeFinder session
- D. Can be R2 in an SRDF configuration
Answer: C
NEW QUESTION # 35
A storage administrator is provisioning storage on a PowerMax 2000 array. The application requires fast reads and the highest possible data protection.
Which RAID level should be recommended?
- A. RAID 5 (7 + 1)
- B. RAID 6 (6 + 2)
- C. RAID 5 (3 + 1)
- D. RAID 6 (14 + 2)
Answer: B
NEW QUESTION # 36
In a legacy SRDF/A mode, the delta sets are numbered as follows:
Capture: N, Transmit: N-1, Receive: N-1, Apply: N-2
What is the number of the Transmit Delta Set after the second cycle switch?
- A. N-1
- B. N+2
- C. N+1
- D. N
Answer: C
NEW QUESTION # 37
Which view of the Unisphere for PowerMax user interface can an architect go to for a heatmap?
- A. All Systems > Databases
- B. Selected System > Dashboard
- C. All Systems > Performance
- D. Selected System > System
Answer: B
NEW QUESTION # 38
A very small data center is being deployed at a service provider site. New 32 GB FC switches to support Open Systems hosts have been purchased and installed in the data center. Two of the tenants for data storage are from competing small businesses.
Data storage for each tenant is expected to be a maximum of 500 TB. Because tenants are from competing companies, the service provider wants to be able to provide data storage from different arrays to each tenant to guarantee separation of data and information.
Which array is recommended to support these requirements, while occupying the least amount of space in the new data center?
- A. VMAX All Flash 250
- B. PowerMax 2000
- C. VMAX All Flash 950
- D. PowerMax 8000
Answer: B
NEW QUESTION # 39
What happens when a SnapVX snapshot is relinked?
- A. Snapshot is deleted and a new point-in-time snapshot is created
- B. Source is refreshed with the original point-in-time data
- C. Snapshot cannot be relinked to the same source
- D. Target is refreshed with the original point-in-time data
Answer: D
NEW QUESTION # 40
Which legacy modes are supported in TimeFinder SnapVX?
- A. Mirror, Replicate, and VP Snap
- B. Mirror, Clone, and VP Snap
- C. Clone, VP Snap, and Snap
- D. Mirror, Replicate, and Clone
Answer: B
NEW QUESTION # 41
Which organization created the SMI-S standard for storage management and promotes vendor neutral architectures and standards?
- A. FIPS
- B. ISO
- C. IEEE
- D. SNIA
Answer: D
NEW QUESTION # 42
What types of files are supported for import into Sizer?
- A. BTP, DCF, CSV, and configuration files
- B. TTP, CSV, and configuration files only
- C. BTP, DCF, and configuration files only
- D. TTP, DCF, CSV, and configuration files
Answer: A
NEW QUESTION # 43
......
D-PVM-DS-23 Study Guide Brilliant D-PVM-DS-23 Exam Dumps PDF: https://lead2pass.guidetorrent.com/D-PVM-DS-23-dumps-questions.html